LIFT KIT- PEDDERS – Toyota Hilux DC, EC (2005-2015)

Pedders 2 inch suspension lift kit. Toyota Hilux ExtraCab DoubleCab 2005-2015

Do you want to raise your Toyota? Then Pedders Suspension has the solution for you.

This kit is our Premium Lift Kit, and is designed primarily to lift and improve the ride of vehicles that don’t normally weigh much. If you regularly carry heavy loads or tow a trailer, consider one of our heavy duty equipment options This kit does NOT reduce load carrying capacity compared to the standard Hilux Ranger rear spring. However, our rear spring, combined with our specially ventilated shock absorber, provides an improvement in the unladen ride, removing some of the harshness that can be felt in the standard vehicle on poor road surfaces.

The kit also includes front struts with ventilated shock absorbers for improved ride comfort. This kit will lift the vehicle by approx. 45mm (see actual dimensions below) which allows for better ground clearance, improved articulation and improved looks. It can be used to accommodate larger tires. The stated dimensions assume a standard vehicle. If you have additional equipment on the boat at the front, such as a winch or boom, this will affect the final installed height. In this case, please contact us as it may be necessary to supply different springs for your application.

The fully assembled Ezifit springs in this kit enable quick and easy mounting on your vehicle. They have a Pedders foam shock, a Pedders spring as well as a new stop and top rack. No need to use spring compressors or reuse old parts. Simply attach flat. These components replace the original items. No other modifications to the vehicle are required. After installation, we highly recommend a wheel alignment for optimal performance of your vehicle.

Key features

1.75 inch lift kit
Improved driving comfort
Increased off-road ground clearance
Piston shock absorbers made of sintered iron with a large opening of 40 mm
Premium steel reels

Vehicle height information

Front end: 765 mm with 16 inch wheels
Back: approx. 40mm higher than standard.
Notes: The heights should be measured as shown in the picture.

Contents of set 803161:
807201 x 2 – Pedders EziFit Foam Support (280071)
6280 x 2 – Pedders Trakryder leaf spring
153226 x 2 – Pedders Trakryder foam shock absorber
EP8338 x 1 – Urethane Leaf Spring Insert (2PKT)
EP8339 x 1 – Urethane Leaf Spring Lug/Bush (8PKT)
434008 x 4 – Pedders U-bolt 60 x 13 x 190 mm